A Miniature Carriage

A miniature carriage

Country Shows

This year to promote my business I am appearing at several country shows which has caused me a problem but then I have thoroughly enjoyed creating the solution. I suspect the first of many miniatures I make.

As a wheelwright all of my work is for someone. A customer has come along, commissioned me to repair or build a new wheel, and when I finish they take it away. I never really have examples of my work lying around to show, and certainly not enough to make a stall look busy.

The solution then is to make some. I have now made a several types of wheel, ranging from a carriage wheel with a rubber tyre to a wheel barrow wheel with a steel tyre, so something for everyone.

The Hardest Wheels

However along the way I decided to make as a demonstration piece, a miniature carriage which can be used to ferry “stuff” around a garden. Based very loosely on a American Conesta Wagon it features 4 traditionally made wagon wheels with steel tyres, of which fitting the tyres was the hardest part. The traditional method is to heat the steel tyre in a fire so it expands. Then whilst hot  you quickly slip it over the wooden rim, and then shrink the expanded steel rim by pouring on water. When it goes well its great fun, when it doesn’t ……. The problem with small wheels is there isn’t sufficient length of steel in the tyre to get any meaningful expansion, and that’s why smaller wheels are the hardest wheels to make.

For the first time I have used an enamel high gloss paint, designed for the  steam trains so once cured it provides a tough shiny finish – perfect when I then add some white enamel pinstripes

The end result as you can see from the picture is a magnificent miniature wagon and I can see it being very popular at our rural shows this summer, starting at the Suffolk Show in May. See you there.

Leave a Reply

Your email address will not be published. Required fields are marked *